- 11 -
3.1 DC OPERATION
You can use the DC output from the mobile power as follows:
(1). Push the main switch 6 to "ON" position.
(2). Receptacle 2 and 5 all are 12V DC output port, according to the plug
type of 12V DC electric devices to choose suitable one to connect.
(3). USB receptacle 3 is 5V DC output port.
NOTE
Be sure the receptacle load current is within receptacle rated
current.
If the DC output is overloaded (in excess of rated current), or if
there is a short circuit in a connected appliance, the
icon
and
icon in LCD Display 9 will show
（
as shown in the
figure below
）
, and the DC output to the connected appliance(s)
will shut off.
3.2 AC OPERATION
You can use the AC output from the mobile power as follows:
(1). Push the main switch 6 to "ON" position.
(2). Push the AC switch 7 to "ON" position.
(3). Make sure the ready LED 8 comes on.