4
D0719 Rev. C
HyNet Attachment Kit: MX3867
©
2016 www.hysecurity.com
Mount HyNet to StrongArmPark DC and
StrongArmPark DCS
Remove front
cover panel
1
5
Connect wiring.
See page 5.
6
Replace and secure
covers.
2
Peel protective paper off
Velcro
®
strip.
3
Adhere the Velcro
®
strip to the inside portion of
the StrongArmPark DC chassis. Press firmly.
NOTE:
Recommended HyNet location is shown in
the illustration. Ambient temperature for adhesion
is between 45˚ and 85˚ F.
4
Set the HyNet onto the
chassis so the ports are
accessible as shown in the
illustration.
