© 2022 HyQuest Solutions
51
Configuration
For more information, see the following subsections:
§
Manually Adding SDI-12 Devices
§
Adding SDI-12 Devices via Address Scan
3.4.5.1
Manually Adding SDI-12 Devices
Manually adding an SDI-12 device can be used when the sensor is not connected (offline configuration
creation/amendment or offsite pre-deployment setup). If the sensor is already connected to the device we recommend
using the Automatic Device addition method (see section 0)
To be able to configure successfully, the device’s SDI-12 address, the appropriate measurement command and number of
variables the device returns for the given command.
Device Name:
User friendly name for assistance with setup of virtual sensors.
SDI-12 Address:
The address SDI-12 sensor device and is obtained automatically, see section
.
Variables:
The number of variables returned by the associated Measurement Command (see below). This
field is obtained automatically when using a device scan, see section
51
52
52
