Hypro 9910-D115, Installation, Operation, Repair And Parts Manual

Page: 5 / 20

5
Parts List for 9910-KIT1708, 9910-KIT1710 and 9910-KIT1711
Shaft Adapter Kit Installation
REF. PART DESCRIPTION QTY.
NO. NUMBER REQ’D
1 9910-380271 Torque Arm 1
2 9910-550290 Roll Pin 2
3 9910-320130 Nut 1
4 9910-320131 Washer 1
5 9910-500160 Collar 1
6 9910-500171 Lock Retaining Washer 1
7 9910-320170 12MAx75 Bolt 1
8 9910-550250 Female Splined Shaft 1
9 9910-320650 Chain “S” Hook 4
10 9910-320640 Chain 2
11 9910-620472 M10 x 20 Bolt 2
12 9910-200231 Washer 5
13 N/A Washer (7/16”; 10.5 mm) 1
14 N/A Eye Bolt 1
15 9910-320610 Wing Nut 1
16 2840-0028 Safety Shield (with KIT1708) 1
17 2270-0004 Washer 4
REF. PART DESCRIPTION QTY.
NO. NUMBER REQ’D
1 9910-550290 Roll Pin 2
2 9910-620470 M10 x 20 Bolt 3
3 9910-200231 Washer 3
4 9910-620240 1-3/8" Male 6 Spline PTO Shaft 1
5 9910-550510 Adapter 1
6 9910-621600 1" Solid Shaft 1
7 9910-580080 Base 1
8 9910-180150 Nut 1
9 9910-540300 10MAx30 Bolt 1
10 9910-620472 M10 x 20 Bolt 2
Order appropriate shaft kit according to chart on page 2.
Female Splined Coupler Kit 9910-KIT1708 (see Fig. 2).
To install the 1-3/8" female splined shaft coupler:
1. Place the torque bracket (Ref. 1) onto pump and
secure with bolts (Ref. 11).
2. Slide female coupler (Ref. 8) onto pump shaft. Align
holes in coupler with holes in pump shaft and press
in pins (Ref. 2).
3. Make sure clamp (Ref. 5) is over groove in the
coupler. Slide the pump onto the PTO shaft of
power source and tighten clamp.
4. Attach chains (Ref. 10) to tractor to prevent rotation
of the pump.
Solid Shaft Kit 9910-KIT1711, Male Splined Shaft Kit
9910-KIT1710 (see Fig. 3).
To install the 1-3/8" male splined shaft coupler:
1. Slide shaft adapter flange (Ref. 5) over pump shaft.
Align adapter hole with hole on the pump shaft and
press in pin (Ref. 1).
2. Bolt shaft adapter (Ref. 4 or 6) onto flange with three
bolts (Ref. 2) and washers (Ref. 3).
3. Place base (Ref. 7) on pump, and secure with bolts
and washers. Secure opposite side of base with bolt
(Ref. 9) and nut (Ref. 8).
Figure 2. Coupler Kit 9910-KIT1708 Installation
9910-KIT1708: 1-3/8" Female PTO Adapter, Safety
Shield, Torque Arm and Chains
Parts List for 9910-KIT1708 Parts List for 9910-KIT1710 & 1711 Shaft Kit
Figure 3. Coupler Kit 9910-KIT1710 Installation
9910-KIT1710: 1-3/8" Male PTO Shaft and Base Kit
9910-KIT1711: 1" Solid Shaft and Base Kit
3 4
4
6
7
8
1
5
9
2
3
5 6
2 8 1 7
9
9
9
10
10
14
13
15
Included in
KIT1710
Included in
KIT1711
17
16
11
12
9
L-1381 (Rev. B)