Hypontech HPT Series User Manual Download Page 3

Page: 3 / 32

CATALOGUE

SYMBOLS ON THE LABEL

.................................................................................. 4

SAFETY AND WARNINGS

.................................................................................. 4

UNPACKING

......................................................................................................... 5

3.1 Scope of Delivery

.............................................................................................................. 5

3.2 Product Overview

............................................................................................................. 6

INSTALLING

......................................................................................................... 7

4.1 Installation Requirement

.................................................................................................. 7

4.2 Mounting Location

........................................................................................................... 8

4.3 Mounting

........................................................................................................................... 9

4.4 Installing the PE cable

...................................................................................................... 9

COMMISSIONING

............................................................................................. 10

5.1 Safety Instructions

.......................................................................................................... 10

5.2 AC Wire Assembly and Connection

.............................................................................. 11

5.3 DC Wire Assembly and Connection

.............................................................................. 12

5.4 Residual Current Protection

........................................................................................... 12

COMMUNICATION

........................................................................................... 13

6.1 System monitoring via Datalogger - RS485/Wi-Fi /GPRS (Optional)

........................ 13

6.2 Output Efficiency Control via Smart Meter

................................................................... 14

6.3 Demand Responsive Modes（DRMs）

........................................................................ 15

START UP AND OPERATION

........................................................................... 17

7.1 Safety Check Before Start Up

......................................................................................... 17

7.2 Inverter LED Indicators

................................................................................................... 18

7.3 Display and Control Logics

............................................................................................ 19

DISCONNECTING FROM VOLTAGE RESOURCES

......................................... 20

TECHNICAL PARAMETERS

............................................................................... 21

10.

TROUBLE SHOOTING

................................................................................... 26

11.

SYSTEM MAINTENANCE

.............................................................................. 31

12.

CERTIFICATES

................................................................................................ 32

Summary of Contents for HPT Series

































Search results

Summary of Contents for HPT Series

Reviews:

Brands by name

Popular brands

Hypontech HPT Series, User Manual

Search results

Summary of Contents for HPT Series

Reviews:

Brands by name

Popular brands