SETUP
1
3-2
powermax
1250
Operator Manual
Upon receipt
1. Check that all items on your order have been received. Contact your distributor or OEM if
any items are missing or damaged.
2. If there is evidence of damage, refer to
Claims, below. All communications regarding this
equipment must include the model number and serial number located on the back of the
power supply.
3. Read Section
1,
Safety, before setting up and operating this Hypertherm system.
Claims
Claims for damage during shipment: If your unit was damaged during shipment, you must file a
claim with the carrier. Hypertherm will furnish you with a copy of the bill of lading upon request.
If you need additional assistance, call the nearest Hypertherm office listed in the front of this
manual.
Claims for defective or missing merchandise: If any component is missing or defective, contact
your Hypertherm distributor/OEM. If you need additional assistance, call the nearest
Hypertherm office listed in the front of this manual.
Contents of box
Verify items against the illustration shown (for hand system configurations).
6.0
BAR
5.0
4.0
PSI
80
70
50
60
60
40
AMPS
80
25
AC
+
_
Operator
Manual
X3
X3
X1 (Standard)
X1 (CE Model)
OR
Quick
Setup
Card
Setup CD-ROM
Warranty card
