Hypertherm Duramax Hyamp Series, Service Manual

Page: 29 / 102

Duramax Hyamp Long Handheld Torches Service Manual 808290 29
Section 3
Operation
Using the hand torch
WARNING!
INSTANT-ON TORCHES
PLASMA ARC CAN CAUSE INJURY AND BURNS
The plasma arc comes on immediately when the torch trigger is activated. The plasma arc will cut
quickly through gloves and skin.
 Wear correct and appropriate protective equipment.
 Keep hands, clothing, and objects away from the torch tip.
 Do not hold the workpiece and keep your hands clear of the cutting path.
 Never point the torch toward yourself or others.
WARNING!
CAREFULLY OPERATE AND STORE THE LONG TORCH
Beware of hot, falling debris when cutting at waist-height or higher. Keep the cutting area clear to
avoid injury or property damage.
Make sure that conditions are safe before cutting in difficult to access areas where visibility is poor.
Always account for falling debris.
Store the long torch in a safe place when not in use. Do not leave it lying on the ground, as this can
present a tripping hazard or result in damage to the torch or lead if stepped on or run over.