Hypertech ICON 8, User Manual

Page: 7 / 16

Keypad Keys
0 - 9 Keys - Used to enter numeric Codes or Function Numbers.
Test Key - Used when a valid User Code has been entered to
enter Test mode.
Isolate Key - Used when a valid User Code has been entered to
Isolate a section, usually before Arming the System.
Partial Key - Used when a valid User Code has been entered to Arm
the System with Pre Programmed sections Isolated.
Off Key - Used when a valid User Code has been entered to
Disarm the System.
On Key - Used when a valid User Code has been entered to Arm
the System, it is also used as the code key when in
programming mode.
NOTE : Some keypads have a seperate code button to
access program mode.
page 5