Hypertech ICON 8, User Manual

Page: 11 / 16

The keypad panic may be initiated by holding both the ON and
the OFF keys depressed together for a period of 3 seconds. If
the alarm aystem is monitored a duress report will be sent to
the monitoring station and, if enabled by the installer, the si-
rens will sound.
Sirens enabled for Panic YES NO
Keypad duress must be enabled by the installer at installation
and is initiated by incrementing the last digit of a valid user
code by 1. For example, if the users code was 1234, then a
duress signal would be sent to the monitoring station if the user
entered 1235 as their code. In all other respects the panel
would react as if the normal code had been entered. For user
codes ending in 9 then a 0 would be entered eg. normal code is
1949, duress code would be 1940.
Keypad duress enabled
YES NO
page 9
Changing the Master Code
Notes:
1. Master code default is 218572.
2. Master code is 6 digits long.
3. The Master code is only used to program the user codes. It cannot
change the status of the system.
4. The system must be in OFF mode to enter the master code.
Key Sequence Operation
Enter existing Master
2 1 8 5 7 2 ON code 218572 used to
enter program mode.
0 0 Select function 00
2 4 6 8 1 2 ON Enter new master
Code e.g. 2 4 6 8 1 2
Off Exit program mode
with the OFF key.
Other Features
Keypad
Panic
Keypad
Duress