XENOPHONE QUICK START - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HYPERSYNTH
7
Note: If the oscillator’s waveform is set to
OFF
, all the LEDs in waveform group will be turned off and
you will no longer see the effect of brightness control for oscillator level
,
the same for sub type and sub
level. A setting of
On/Off
disables this feature.
Dezipper:
(Off, FltFreq, ModWheel, FltF+Modw, Default: FltF+Modw)
Removes zipper noise by smoothing transitions between values generated by “Filter Freq” Knob and
Mod wheel [E1 soft knob].
Semi Enc Accuracy:
(--/On, Default: On)
Determines the accuracy of semitone 1/2/3 encoders. A setting of
On
provides more preciseness in
editing the values.
Enc Response:
(Fast/Normal/Slow/Slower, Default: Normal)
Determines how encoders response to movement.
Fast
means it captures quickest move (in real-time)
however in this case it may also capture unwanted data due to contacts bounce/Noise.
Normal
is
system managed setting which makes a balance between “Response to Move” and “Noise Rejection”.
Slow and Slower
increase noise-rejection strength while decrease response to fast movement. (Enc
response affects all encoders)
Panel TX MIDI:
(Off, On)
A setting of
on
means, Xenophone transmits MIDI messages (CC, NRPN) when you tweak a knob or
button on the front panel. Every parameter has a dedicated CC or NRPN number. According to the
settings Preview keys also transmit “Note on/off” or “Stop/Start/Continue” messages.
Arp/Seq TX MIDI:
(Off, On)
A setting of
on
will enable the Arpeggiator and Sequencer to send the generated notes to an external
device (other synthesizers).
Preview Keys:
(3Notes, StrtStp)
A setting of
3Notes
means the preview keys act like C3, C4 and C5 keys of a MIDI keyboard. A setting of
StrStp
means preview keys acts like Stop, Play and Continue button of a standard sequencer.
MIDI Over USB:
(Off, On)
A setting of
on
means you can transmit/receive MIDI messages via Xenophone USB port. A specific
driver/software must be run on your PC in order to use these feature. While MIDI over USB is set to on,
hardware MIDI ports will be disabled.
.
.
.