XENOPHONE QUICK START - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HYPERSYNTH
2
Connection Diagram
Connecting AC Power
Before making any power connections, make sure the Xenophone’s power switch is turned off.
1.
Plug the AC Adaptor into a power outlet
2.
Plug the female end of the adaptor cable into the Xenophone’s power socket.
Making Audio Connections
•
Stereo
. Connect two cables from the Xenophone’s left and right outputs to two inputs of an active
speaker/amp or mixer.
•
Headphones
. Plug a set of headphones into the headphone jack on the rear panel.
Turning On the Power
Before turning on the Xenophone’s power, consider these two questions:
• Are all peripheral devices connected correctly?
• Have the volume controls of the Xenophone and all connected audio devices been turned to their
lowest settings?
1.
Turn on the POWER switch located on the rear panel of the Xenophone.
2.
Turn on the power for any connected amplifiers or speakers.
3.
Wait for the Xenophone to start up. When it has started up normally, The home page will
appear (next page).
4.
Set the volume for your connected amplifier and speakers. While playing the Xenophone
preview keys or external keyboard, gradually raise the Xenophone’s main volume in the rear
panel to the desired listening level.