Hypermedia HG-3000, Product Manual

Page: 25 / 122

Hypermedia Systems
Hardware and Installation
Release 5.3 (June 2013)
15
1.6 Cable Connections
There are two types of connections:

For Hybrid Cards (HBS/HBD)

For PC
1.6.1 Hybrid Cards (HBS/HBD)
To install the HG3000 with an HBS or HBD card (see Figure 8 and Figure 9):
1. Install the Hypermedia Software (included in the CD).
2. Connect a PC or Laptop with a straight Ethernet cable to the Main ETH port at
the HBX card.
3. Ping the HG default IP address, 192.168.9.2 , to test the connection.
4. Check and verify your PC/Laptop IP is configured as follows:

IP: 192.168.9.5

Subnet mask: 255.255.255.0
5. Open the Server list application and add 192.168.9.2 as a server (the default
password is
admin
).
6. Use the HGS setup parameters application (first from the left):
a. Login with the password
admin
.
b. Change the IP address with the desired IP address of the client’s subnet.
7. Connect the Main ETH port to the client’s network.