Hyperion HYP-MSEWENR-W Page 6 Installation Manual Download

Page: 6 / 8

Hyperion Wireless MSE Installation Guide

www.wrensolutions.com

7L781 Rev A 200428

NSTALL

MSE

ANCHORS

Remove the MSE from the hanger and drill the anchor holes using the masonry bit provided.

Install the anchors per the instructions provided in this document.

Drill a

3/4”

cable entry hole in the marked location.

OUNT

THE

MSE

Hang the MSE on the hanger and secure the device to all four installed anchors.

Summary of Contents for HYP-MSEWENR-W

Page 1: ...Hyperion Wireless MSE Installation Guide www wrensolutions com 7L781 Rev A 200428 INSTALLATION GUIDE HYPERION MODULAR SECURITY ENCLOSURE HYP MSEWENR W ...

Page 5: ...nting Hook in the desired location Use 2 of the anchors provided in the hardware kit Refer to the masonry sleeve anchor instructions in this document for proper installation of anchors 3 PREP THE WALL FOR MOUNTING Hang the MSE on the Mounting hook Mark all four anchor locations and the cable entry location Install the Anchors ...

Page 6: ...S Remove the MSE from the hanger and drill the anchor holes using the masonry bit provided Install the anchors per the instructions provided in this document Drill a 3 4 cable entry hole in the marked location 5 MOUNT THE MSE Hang the MSE on the hanger and secure the device to all four installed anchors ...

Page 8: ...ATION Seal the Cable Penetration using an appropriate outdoor sealant 9 ATTACH THE DOOR Attach the door and secure all four fasteners 10 CONNECT POWER Connect the power supply to AC110V 11 The device is now powered on and ready to be added to Hyperion Refer to the Hyperion User Manual for setup details ...