X-RES
3 Of 37
2. Building Instructions
General construction
We tried to keep the structure of the aircraft as easy as possible, without
compromising on the performance.
However, it is very important to proceed with the necessary care to build a
straight and high-performance model.
Some modular sheets are for sheeting. Please
cut carefully here so there it is sufficient material for everything.
Separate out the CNC milled parts only when required.
The inner corners radius on parts where the mill stops, have to be reworked
individually.
Bonds, unless otherwise described, thin Superglue, CA, should be used.
Epoxy 5 minute for fuselage / Wing screw connection joiner, Aluminum
tube CFRP link at the Wing.
It is explicitly stated in these instructions, if epoxy or glue should be
used.
If you are faced with unsolvable problems, you can reach me by email.
Summary of Contents for X-res
Page 12: ...X RES 12 Of 37 ...
Page 36: ...36 Of 37 X RES Forward fuselage cross section Cross grain balsa 0 8mm ply ...
Page 37: ...X RES ...
