HyperFlight
Pulsar 4000e Assembly Guide
Aileron Servo
· This is virtually the same as a flap servo
except that the servo wiring is extended
prior to gluing the servo in place, the plug
with around 3 inches of wire is allowed to
protrude though the root rib
· For the ailerons I used a
Hyperion HP-DS13-TMB Digital servo
. Beware of using
small lite servos. In a dive to loose height you could get aileron flutter causing the
servo to break a gear, especially a plastic one. (YES it has happened to me on one of
my Pulsar 3.2’s a few years ago)
Elevator Servo
· Generally as per aileron/flap servo’s, but I used a socket and ball arrangement for
connection to the servo
.
Connection to the elevator plate use a standard clevis with push rod soldered to the
clevis
· Servo used was a
Hyperion HP DS09-AMD Digital servo
(c) 2012 HyperFlight Drybank Farm Fose Way Ettington Stratford-on-Avon Warwickshire CV37 7PD
8
