Manuel de montage des antennes Hautes performances Wi200-Wi700
HYPERCABLE sarl 74 Avenue Paul Sabatier ZA de la Coupe 11.100 Narbonne Tel : +33 (0) 4 68 70 91 75 - Fax : 04 68 70 91 76
Mail : [email protected] - N° SIRET : 384 007 894 00023 – Code TVA CEE: FR90384007894 -
www.hypercable.fr
5. Antenna Adjustment
5.1 Azimuth Adjustment
Make coarse azimuth adjustment in the following way (shown in Fig 5.1): loosen the 4
nuts (No.1) of the Clamp (No.2) properly, and then push the whole structure slowly to make a
rotation from 0° to 360° around the Mounting Pole. Use compass to determine the antenna’s
position if necessary, and then tighten the nuts (No.1).
Make fine azimuth adjustment in the following way: loosen bolts (No. 5 and 6), and then
adjust nuts (No.3) of Azimuth Adjustor back and forth slowly. Antenna can make fine azimuth
adjustment from -15° to +15°; tighten all the standard parts after the adjustment is done.
5.2 Elevation Adjustment
Make elevation adjustment (shown in Fig 5.2): loosen the nuts (No.1), and then rotate
Elevation Adjustor clockwise or counterclockwise. Antenna can make fine elevation adjustment
from -15° to +15°, tighten all the standard parts after the adjustment is done.
