Manuel de montage des antennes Hautes performances Wi200-Wi700
HYPERCABLE sarl 74 Avenue Paul Sabatier ZA de la Coupe 11.100 Narbonne Tel : +33 (0) 4 68 70 91 75 - Fax : 04 68 70 91 76
Mail : [email protected] - N° SIRET : 384 007 894 00023 – Code TVA CEE: FR90384007894 -
www.hypercable.fr
3. Connect Hanging Bracket and Assembly Reflector
3.1 Mount Hanging Bracket
Step1:
Connect Y Type and E Type Extruded Profile with two M10×25 bolts, and then put two
M10×140 bolts in the mounting hole of Y Type Extruded Profile (show in Fig 3.1).
Step2:
Put Azimuth Adjustor in another mounting hole of Y Type Extruded Profile, and then use
Bolt M10×35 to fix it to the E Type Extruded Profile (shown in Fig 3.2).
Step3:
Connect the two clamps to the four pieces of M10X140 bolt as shown in Fig 3.3.
Screw the nuts on the bolts into a position around 20mm to stabilize the clamps.
Step4:
Finishing the entire bracket assembly as shown in Fig 3.4.
