Hyper Split Hydraulic Log Splitter
ToolTuff Direct LLC, 15000 W44th Ave, Ste B, Golden CO 80403 Page 4
NEVER
exceed 45mph when towing your log splitter. Towing the log
splitter at speeds higher than 45mph could result in loss of control,
damage to the equipment, serious injury or death. Adjust towing speed
for terrain and conditions. Be extra cautious when towing over rough
terrain especially railroad crossings.
ALWAYS
turn off engine gas before towing.
Hydraulic Safety
The hydraulic system of your log splitter requires careful inspection
along with the mechanical parts. Be sure to replace frayed, kinked,
cracked or otherwise damaged hydraulic hoses or hydraulic
components.
NEVER
check for leaks of hydraulic fluid with your hand. Fluid escaping
from a small hole can be almost invisible. Escaping fluid under pressure
can have sufficient force to penetrate skin causing serious personal
injury or even death. Leaks can be detected by passing a piece of
cardboard over the suspected leak and looking for discoloration.
ALWAYS
seek professional medical attention immediately if injured by
escaping hydraulic fluid. Serious infection or reaction can develop if
proper medical treatment is not administered immediately.
ALWAYS
be sure to relieve all pressure by shutting off the engine and
moving the valve control handle back and forth should it become
necessary to loosen or remove any hydraulic fitting.
NEVER
remove the cap from the hydraulic tank or reservoir while the
log splitter is running. The tank could contain hot oil under pressure,
which could result in serious injury.
NEVER
adjust the hydraulic valve. The pressure relief valve on your log
splitter is preset at the factory. Only a qualified service technician
should perform this adjustment.
Maintenance and Storage
Maintenance
Please read engine manual for operating and maintenance instructions.
Always check the oil level of the hydraulic reservoir before operation.
