63
◉
◉
TURN SIGNAL LAMP
1. Remove the lens by removing the screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new lamp, assemble the
lens.
Overtightening the screws may cause
the lens to crack.
CAUTION
◉
◉
BRAKE / TAIL LAMP
1. Remove the socket in the lamp housing
by turning socket to the counter-
clockwise.
2. While push in the bulb, turn it to the
counter-clockwise and pull it out.
3. To fit the replacement bulb, push it in and
turn it to the clockwise while pushing.
XRX125SM¿ „fi» ¿º 2007.8.27 3:4 PM ˘
` 63 JINSUN 300DPI 100LPI T
