HYOSUNG NH-2700T, Operator'S Manual, Page: 221 / 344

NH-2700T 7. Appendix
7- 4
Error Code Description Trouble shooting
9722DN0
Receipt Printer communication failure
during sending command to Receipt
Printer
1. Do RESET at Operator Function
2. Reboot ATM
97912XX DEV_SPR Time Over Error
1. Reboot ATM
2. Call your attendant
97922XX DEV_SPR FATALERROR (WARNING)
1. Reboot ATM
2. Call your attendant
A010100
Open lever detected before executing
command
Close the feed lever.
A010200
Printer thermal head overheated while
executing command Check the thermal printer head and change if
necessary.
A010300
Paper jam detected before executing
command
Remove any jammed paper from the printer.
A010400
Paper setting error detected before
executing command
Remove and re-install the receipt paper.
A010500
Paper check error detected before
executing command
Remove and re-install the receipt paper.
A010800
Paper cutter software check error detected
before executing command
Check for and remove any jammed paper.
A080100
Open lever detected while executing
command
Remove any jammed paper.
A080200
Receipt printer head overheated while
printing Check the thermal printer head and change if
necessary.
A080300
Paper jam detected while executing
command
Remove and re-install the receipt paper.
A080400
Paper setting error detected before
executing command
Remove and re-install the receipt paper.
A080500 Paper check error in doing command Remove any jammed paper.
A080800
Paper cutter software check error detected
while executing command
Check for and remove any jammed paper.
ADN0100
No response detected for 30 seconds after
sending command Check cable and connection between the CE
and printer.
ADN0F00
No response detected for 30 seconds after
sending command Check cable and connection between the CE
and printer.
ADN1100 No response detected after 3 retries
Check cable and connection between the CE
and printer.
ADN1200
No response detected between ENQ-ACK
after 5 retries of ENQ Check the cable and connection between the
CE and printer.