24
◉
BRAKE PADS
●
Wearing condition of brake pads can be
checked by observing the wear limit line on
the pads. When the wear exceeds the limit
line, replace the pads.
●
How to replenish with brake fluid
1. Clean the brake fluid reservoir around not to
allow dusts to get inside of it.
2. Loosen the screw and open the cap.
3. Replenish with brake fluid to the limit line.
The recommended brake fluid :
4. Fasten the cap.
혹심심턱템크텄텀텅텀호크텄텀테턱
Check the tire pressure when it is cold.
Tire Pressure
Solo riding
Dual riding
1.25
쥠타
123
밗
18
회
1.75
쥠타
172
밗
25
회
2.00
쥠타
196
밗
29
회
2.25
쥠타
221
밗
33
회
Front
Rear
TIRES
●
Don t replenish with brake fluid over the
limit line. It will leak out of the brake fluid
reservoir.
●
Be careful not to allow dusts or water to
go inside when it is replenished.
●
Don t use the unrecommended brake
fluid.
●
Brake fluid can damage severely the
plastics or rubbers. When it is spilt on
the parts, mop them up or wash them
with water.
CAUTION
DOT3 or DOT4
싻턱탱템크텄텀텅텀호크텄텀테턱
�
ProCarManuals.com
