9
The fuel gauge indicates the remaining
amount whenever the ignition switch is
(ON) or (OFF). For checking the rema--
CAUTION
IGNITION SWITCH
CONTROLS
INSTRUMENT PANEL
ining amount of fuel, put the motorcycle on
the center-stand and set the ignition switch
(ON).
P
U
S
H
I G
N
I
T
I
O
N
ON
OFF
텃턱홈
텄텍빔텃
P
U
S
H
I G
N
I
T
I
O
N
심혹텝좼
SPEEDOMETER
The speedometer indicates the road speed in
kilometers per hour.
PARKING BRAKE INDICATOR LAMP
The parking brake indicator lamp will come
on when the parking brake is operated.
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated either
to the right or to the left, the indicator will flash at
the same time.
HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come on
when the headlamp high beam is turned on.
FUEL GAUGE
It indicates the remaining fuel amount in the fuel
tank. F mark indicates the fuel tank is full. E
mark indicates the fuel tank is empty or nearly so.
(the remaining fuel is 1.3
ℓ
at E the capacity is
7.0
ℓ
) Fill the fuel tank before E .
The ignition switch has three positions :
◉
(ON) POSITION
The ignition circuit is completed and the engine can
now be started. The key cannot be removed from
the ignition switch in this position.
◉
(OFF) POSITION
All electrical circuits are cut off. The engine will not
start. The key can be removed.
◉
(LOCK) POSITION
To lock the steering, turn the handlebar all the way
to the left. Push down and turn key to the
(LOCK)
position and remove the key. All electrical circuits
are disconnected.
ODOMETER
The odometer registers the total distance that the
motorcycle has been ridden.
ProCarManuals.com
