44
© Erwin Hymer Group North America, Inc
Monitor Panel (Continued)
Water Pump Switch
It should be on only when you have water in the fresh water tank and wish to use the sinks, showers or toilet. The pump should not be run without
water. As with the patio light switch, pressing the top of the button turns the pump on and pressing the bottom turns it off. See location in picture
of the Monitor Panel on page 43.
Water Heater Switch
The water heater is a part of your heating system and has its own control screen labeled ‘Truma’. The water heater can be operated with propane
or 120VAC power.
Tank Charge Indicators
In the center of the monitor panel are the indicator lights for the battery charge level, the fresh water tank levels and gray water tank levels. The
battery disconnect switch must be on for this display to work. Press the button for each to see the display. These will give you an approximate
reading, to the nearest third, of how much is in each tank. The four indicator lights for the battery are low, fair, good and charging. (Picture 44.1)
Picture 44.1