EN © 2021 HYKKER.
All rights reserved.
Dynamic Bass headphones
20
WIRED 3.5 MINIJACK CONNECTION
If the headphones were turned on in BT mode, inserting the plug into the minijack
connector will turn off the headphones. Removing the plug will keep the headphones
turned off.
The headphones can also be used without starting BT connection or when the battery
power is exhausted. They can be connected to an audio source with a 3.5 mm minijack
output - the included cable is used for this. To connect the headphones with a cable,
unfold the connecting cable and insert one of the 3.5 mm minijack plugs into the
headphones socket, the other plug to the socket on the sound source. The volume and
playback are controlled by the sound source.
During a wired connection, it is not possible to turn on the device in wireless mode.
ADJUSTMENT OF THE HEADBAND LENGTH
To adjust the length of the headband, insert or pull out the parts of the headband at
the adjustment point (2).
9. CLEANING AND MAINTENANCE
Regular and properly performed cleaning and maintenance will ensure a long life of
the equipment and its trouble-free operation.
Cleaning and maintenance may only take place when the device is turned off an
unused.
Do not submerge any parts of the device in water.
Do not use sharp tools or aggressive cleaning agents, including concentrated
dishwashing liquids, lotions, and scouring pastes to clean stubborn dirt.
The parts of the device may only be cleaned with a dry cloth, brush or paper towel.
10. TROUBLESHOOTING
In case of any problems with the device, please read the tips below.
The device does not contain any parts that can be repaired by the user.
I cannot switch the device
on.
Charge the battery.
Disconnect the 3.5 mm minijack cable.
When the device is
connected to a USB port
on the charger or PC, the
battery does not charge.
Check the USB output on your computer or charger.
Check the cable. If it is defective, use another one,
checked and approved by the manufacturer.
If a tested and manufacturer approved cable is not
charging, please contact the manufacturer's hotline.
