EN © 2020 HYKKER.
All rights reserved.
CHRONO 4
11
almost identical to those of a smartphone.
7.9 Pedometer
Remember that the device reads the movements of your hand while walking or
running.
When you finish the activity, turn off the reading of data. If you sit at your desk
and make various movements with your hand, these can be read as steps that will disturb
the pedometer data.
The number of calories burned is calculated from a formula, where the user's weight
of 75 kg, step length - 60 cm and speed of 5.5 km/h are assumed.
Smartwatch is equipped with a G-Sensor, which allows you to use the device to
measure user activity. When walking, we usually wave our hands, which the device
can read and write in its memory as taking steps. The application shows the duration
of activity, as well as the number of steps taken and calories burned. Reading data
is started and paused manually.
The pedometer application can be called up by clicking on the icon
in the
smartwatch menu. The pedometer screen will appear. You can start measuring
activity.
7.10 Calendar
A calendar application is built into the smartwatch. The calendar application can be
called up by clicking on the icon
in the smartwatch menu. The calendar
screen will appear. To exit the calendar slide the screen in any direction.
7.11 Phonebook
After pairing your smartwatch with your smartphone via Bluetooth or when you
install a GSM operator card (microSIM) in it, it is possible to handle contacts from
both the paired smartphone and those stored in the memory of the SIM card. The
contact control function can be called up via:
•
Click the icon
on the phone keyboard (bottom left corner),
•
clicking on the icon
in the smartwatch menu.
You will see a menu for managing phonebook.
7.12 Smartwatch settings
To configure the smartwatch, select the icon
from the menu . You can change
