28
Setting the radio stations
1 .
Enable the radio function in accordance with point “Turning the radio on/off”.
The initial radio wave band will be shown on the display.
2 .
Press and hold the “Up” (6) or “Down” (8) button for approx. 2 seconds to search
for the available radio stations automatically.
3 .
Press and hold the function button (2) to store the radio station frequency. The
P number of the stored radio station will be shown on the display.
4 .
Follow points 2 and 3 to set all the radio stations.
CAUTION!
The device can store 20 radio stations.
Radio station selection
1 .
Enable the radio function in accordance with the instructions in “Turning the
radio on/off”.
2 .
Press repeatedly the “Up” (6) or “Down” (8) button to select the radio station,
then press the function button (2) to confirm the selection.
7.7 Bluetooth function
How to pair the radio with a mobile device via Bluetooth
To pair the radio with your phone or another mobile device, follow the instructions
below:
1 .
Press repeatedly the function button (9) to enable the Bluetooth function.
When Bluetooth is active, “bt” will flash on the display.
2 .
Enable Bluetooth in your mobile device, and search for the device on the list of
available devices (Hykker Radio).
3 .
If the mobile device asks for the password, enter “0000” or “1234” and confirm.
4 .
Connect / pair the devices. When the devices are successfully paired, the “bt”
on the display will stop flashing.
CAUTION!
The maximum distance between the mobile device and the radio is 10 m.
Volume adjustment
To set the desired volume, use the volume control dial (7) to change it: rotate counter-
clockwise to decrease, clockwise to increase.
Caution!
When playing music via Bluetooth, the sound volume also depends on the
volume set in the mobile device.
