WL Survey
Before start make sure Bluetooth and Gps/Geolocalization are enabled as per tablet
’
s instruction manual.
1.
Tap on the
WL Survey
icon to start.
Tablet screen appears as
follows:
2.
Check that
RFAnalyze
and
Survey
icons are blue; if they are grey coloured, consult the troubleshooting section at the end of this manual.
3.
Tap on one of the icons to start the needed app.
RFAnalyze
This tool is used to monitor wireless environmental traffic in one or more channels; purpose of this is to find a relatively clean channel suitable
for your wireless system.
Interference that can be assessed with this app is normally caused by other wireless devices or other equipment operating within the moni-
tored channel or channels.
Survey
This app is used to measure the wireless signal
’
s link quality between the test
HFW
-
EM
-
01
and the survey probe.
L20
-
SWSKT
-
14EN (vP.5)
8
Picture 11
