hyfire HFW-STK-03, User Manual

Page: 2 / 20

General description
To ensure that a wireless fire detection system works correctly and to avoid installation issues, the use of the HFW - STK - 03 is strongly recom-
mended, as it is a proven test kit that enables the installer to check the wireless link quality on the installation site and therefore choose the
perfect position for the wireless devices.
The HFW - STK - 03 is a “ ready to use ” diagnostic system; it ’ s easy to use and it doesn ’ t need a particular programming setup.
When the kit ’ s tablet is remotely connected to the HFW - EM - 01 expander module through the Dongle interface device, the wireless link quality
is shown on the tablet ’ s dedicated app.
The installer can easily move around the site with the tablet, the Dongle and the survey detector to check the quality signal level between the
HFW - EM - 01 and the survey detector (picture 1).
HFW - STK - 03 kit ’ s content list
- 1x HFW - EM - 01 test expander
- 1x HFW - EM - 01 ’ s power supplier (12 Vdc)
- 1x wireless detector survey probe
- 1x survey detector ’ s supporting pole (3x sub - assembly parts)
- 1x Dongle interface device
- 1x tablet
- 2x CR123A (3Vdc)
- 2x LR6 AA (1.5 Vdc)
- 3x screws
- user manual
info@hyfirewireless.co.uk L20 - SWSKT - 14EN (vP.5)
Wireless expander
Test detector
Supporting pole
Tablet
Dongle interface
device
Picture 1
2