HYENA E-BIKE SYSTEMS
12
Operation
Operation Instructions
•
WARNING
- Only charge the battery by following all
safety descriptions. Please read and follow the
instructions for using the battery charger.
•
CAUTION
- The battery packs are partially charged and
set to sleep mode before they were shipped; in order to
wake up the battery and ensure that the battery has full
and sufficient power, please charge your battery pack fully
before using it for the first time.
• All Hyena Chargers only use genuine Hyena batteries
and battery packs, or battery packs approved for use with
your e-bike by the manufacturer, and purchase only from
reliable sources.
• Use of uncertified battery packs may result in death or
severe injuries.
• Charging is restricted to certified Hyena lithium battery
packs. The battery pack voltage must comply with the
charger output voltage; otherwise, it might result in risks of
explosions or fires.
•
CAUTION
- Charge the battery indoors to avoid
exposure to rain or wind. Do not use outdoors or in
environments with high humidity.
•
WARNING
- Be sure to hold the power plug steady
instead of hold the cord when connecting or disconnecting
from the electrical outlet. Failure to do so may cause a fire
or electric shock.
• If the following symptoms are observed, stop using the
device and contact the place of purchase. A fire or electric
shock may be caused:
- If heat or acrid-smelling smoke is coming out from the
power plug.
- There may be a bad connection inside the power plug.
• Do not place the battery charger on the floor or other
dusty places when using it.
• Place the battery charger on a stable surface such as a
table when using it.
• Do not place any objects on top of the battery charger or
its cable. Do not place a cover on it either.
• Do not apply excessive tension to the cables and
charging plugs.
• Do not touch the metallic parts of the device or the
power plug on the AC adapter or other parts when the
charger is wet, electric shocks may occur.
• Use only a 100-240 V AC electrical outlet, do not
overload the electrical outlet with appliances beyond its
rated capacity.
• If the electrical outlet is overloaded by connecting too
many appliances using adapters, overheating resulting in
fire may occur.
• Do not damage the power cord or power plug. (Do not
damage, process, forcibly bend, twist or pull them, bring
them near hot objects, place heavy objects on them or
bundle them tightly together.)
If they are used while damaged, fire, electric shocks, or
short-circuits may occur.
• Do not use the battery charger with commercially-
available electrical transformers designed for overseas
use (travel converters). They may damage the battery
charger.
• When charging the battery, do not move the bicycle. The
battery charger's power plug may come loose and not be
fully inserted into the electrical outlet, resulting in a risk of
fire.
• When charging the battery, be careful not to trip over the
charger cord. This may lead to injury or cause the bicycle
to fall over, damaging the components.
•
CAUTION
- According to ECP, when the battery is in
over-charged/over-discharged conditions, the battery will
automatically disconnect the circuit for safety protection.
