HydroTherm DYNAMIC/X8, Owner'S Manual

Page: 24 / 33

8.6 SETTING THE CLOCK
The correct time is necessary for the Hydrotherm to operate in TIMER mode properly. Please note that that the
time is displayed in a 24 hour format.
1. Press the CLOCK button to begin setting
the time. The hour value will begin
flashing.
2. Press either the UP or DOWN button
to adjust the flashing hour value
(example hour set to "14").
When ready, press the CLOCK button to
toggle to the minute value.
3. Press either the UP or DOWN button
to adjust the flashing minute value
(example minute set to "30").
When ready, press the CLOCK button to
finish setting the clock.
i
If the time is inside of the timer periods on TIMER mode, the system will display "ON " next to
the clock.
If the time is outside of the timer periods on TIMER mode, the system will display "OFF " next to
the clock.
→
→
For example (using factory default timers):
Time = 09:00
Time = 13:00
24