background image

2

Hydro

Tab

Marine Engineering

Disclaimer

The interceptor units are also steering 

equipment and it is the sole responsibility of 

the navigator-operator to ensure that, at any 

point, any problem that will alter the boat's 

course, rising from malfunction of 

interceptors, should be dealt immediately by 

the operator. At no circumstances, fault of our 

interceptor equipment leading to any kind of 

accident, creates liability for the 

manufacturer.

Trademark Notice

Hydrotab is a registered trademark of Olympic 

Engineering Ltd, Greece. All other trademarks, 

trade names or company names referenced 

herein are used for identification only and are 

property of their respective owners.

Patent Notice

The Hydrotab products are protected by 

patents and industrial design patents, patents 

pending or design patents pending.

Declaration of conformity

This product conforms to the following

Electromagnetic Compatibility (EMC)

 

regulations

 

and standards for use in marine 

environments

.

CE EN 60945

Technical information and 

Documentation

The technical information provided in this 

document was accurate and correct at the 

corresponding production time of the 

Hydrotab interceptors. Our operating principal 

for improving the manufactured product, may 

lead to changes regarding its specifications 

without prior notice. Liability will not be 

accepted for any inaccuracy considering the 

product and the user manual.

Fair use statement

This manual can be printed or copied for your 

own use only. Copies should not be provided 

to third parties and manual should not be 

commercialized.

Product Disposal

Waste removal of this product must be 

according to the 

Waste Electrical and

 

Electronic Equipment (WEEE)

 Directive.

Product Registration

Please register your product online in order 

the warranty to be valid.

Summary of Contents for 300SR





















Reviews: