Hydropool HSC395G, Owner'S Manual

Page: 23 / 55

23
MODIFYING SCHEDULES
To see and / or modify the Water
Care category, use the Se ngs icon
to open the selected Water Care menu.
Scroll through the menu to choose a schedule
to modify (choice of economy and filtra on
schedules).
You have several possibili es for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The me and dura on are set in 30 minute
increments. Once you have set the schedule,
use Spa Func on Icon to go back. Ensure that
you have selected the desired Water Care op-
on in the main Water Care menu.
The filtra on schedule shown on the screen
will apply to the main filtra on pump. Your
spa uses a circula on pump configured to run
24 hours by default and the screen will show
you the purge se ng instead of filtra on. The
purges are pre- programmed for a fixed
number of minutes, therefore the dura on
will be set to N/A on the screen, and only the
start me can be modified.
FILTERING
Your spa is equipped with a circula on pump
that filters your water for 24 hours a day. If
the water temperature exceeds the set
temperature by 4°F (and set point is 95°F or
higher) then this pump will shut off
automa cally un l the temperature drops
below the set point by approximately 1.5°F.
You can bypass the pack filtra on over -
temperature feature. When Warm weather is
"Off", the filtra on over -temperature is
disabled. This feature allows the spa to
con nue filtering even through the water
temperature is high.
MAINTENANCE
From the Se ngs page you can access the
Maintenance Menu, which gives you access
to the following op ons:

Maintenance reminders

Standby
Press the text to make a selec on.