Hydropool HSC395G, Owner'S Manual

Page: 27 / 55

27
2. Installing the spa transmi er
If you purchased a spa with in. touch 2 as a standard feature or as an op on, note that the spa
transmi er will be pre
-installed.
To ensure proper signal transmission, it may be necessary to change the posi on of the
transmi er once the spa is installed in the yard. The transmi er should be located on the side
of the spa facing the house.
The in. touch 2 spa transmi er must be installed under the spa skirt, at least 12” (30 cm) away
from any metal component or structure, as close as possible to the house to op mize the
signal strength.
Simply connect the spa transmi er into an available CO port of the spa control system (or any
other accessory with a free CO port, such as the in. stream 2 audio amplifier, or the in. clear
water sani za on system).
3. Pairing the home and spa transmi ers
If you bought an in. touch 2 equipped spa or a complete retrofit kit, both transmi ers of your
in. touch 2 will be factory pre-paired.