Hydronic Air Driven Pumps & Intensifiers
820 Installation, Use and Maintenance Booklet
1-4-2021
Page 9
Maintenance
Periodically release the condensation from the air filter. Replace the hydraulic oil every
1500 hours or whenever the oil is polluted.
Warning
: Remember that repair work can only be made when pneumatic and
hydraulic pressure has been released and you are sure that no pressure remains in the
circuit.
Delivery of the pump
Transport
All the material shipped, including the detached parts, has been thoroughly checked
before being consigned to the forwarding agent. The pump is shipped in double
corrugated cardboard packaging, which assures protection of the product.
Unpacking
On receipt of the product, open the packaging and remove the pump. Take care not
to damage any part of the pump. Make an initial check on the pump for damage in
transit. In case of damage or if in doubt, do not use the pump and contact Hydronic
Corporation or your distributor. The packaging [plastic bags, expanded polystyrene,
nails, screws, wood, etc.] must not be left within reach of children since they are
potential source of danger. Be sure to dispose of pollutant or non-biodegradable
materials in the correct way. Materials must be disposed of in accordance with the laws
in force.
Approximate gross weight
P820 standard reservoir
33 lbs.
P828 large reservoir
44 lbs.
Contents of the package
The packaging will always contain the following:
1 x air driven hydraulic pump
1 x installation, use and maintenance manual