14
TFC Membrane
Rejection Chart
The TFC membrane rejection chart
can be very helpful as a general
guideline, but is not a guarantee.
Every water source has a different
chemistry, temperature and TDS,
and it is best to test your water
thoroughly to determine your
unique water profile.
A good place to start is EWG.
org, just type in your zip-code to
determine what contaminants (if
any) you may
be dealing with.
STEP 5:
Run the system for 30–45 minutes,
discarding all purified and
wastewater before using.
STEP 4:
Push the new membrane back into the housing with the end that has the two black O-rings going
in first. Push firmly until it bottoms out and can’t go in further. Then thread the cap back on tightly
and reconnect the white 1/4" tubing. Be sure the O-ring in the cap is in place.
CHANGING THE RO MEMBRANE, CONT.
Summary of Contents for stealthRO150
Page 1: ...USER MANUAL...
