Hydroid
– Series User Manual
18
04/19
IF THE SYSTEM HAS AN ANTI-SCALANT FILTER (OPTIONAL HL 11595), AND
IF THE PRODUCT (PURIFIED WATER) WATER IS USED AS POTABLE WATER,
THE BLEND VALVE MUST REMAIN CLOSED. THIS IS TO AVOID INGESTION
OF ANY CHEMICALS.
FLUSHING THE SYSTEM
As time progresses, the efficiency of the membrane will decline. In general, the salt rejection
does not change significantly until one or two years after installation when operated on properly
pre-treated feed water. The PRODUCT (purified water) flow rate will begin to decline slightly
after one year of operation but can be extended with diligent flushing and cleaning of the
membranes. The system should be flushed regularly to remove sediment from the surface of
the membranes. Hydroid systems are pre-programmed to flush for 5 minutes upon tank full
shut down. Should your application require another configuration, the S-100 controller provides
several flush types, modes, and times to select from. Please contact Hydrologic for more
information.
Summary of Contents for Hydroid
