The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
NOTE: model sizes and configurations vary, see the chart.
3.
Inspect the alignment of the “C” (access) panels during the assembly process. Verify that their
removal and replacement allows adequate space and positioning within the openings and with the
adjacent panels prior to attaching any bracket to the concrete.
4.
Set the “C” (access) panels in place with about a 3/16” gap on each side of the “C” panels as the roof
is assembled.
A.
Set the “D1” (roof) panel on a “B-A1-A2-B” (side-end-side) assembly. Fasten the “D1” (roof) panel to
the “B-A1-A2-B” (side-end-side) assembly through the holes provided (Fig 1) using three (3) hex
headed screws.
B.
Insert an Inside Roof Clip into the “D1” (roof) panel at the “B” panel studs (Fig. 1C). Attach the clip to
the “B” panel studs as shown using one (1) hex headed screw per clip.
C.
Repeat step 4A and 4B for the “D2” (roof) panel and second “B-A1-A2-B” (side-end-side) assembly.
Side View of Roof Panels
