Initial Set-up
Chemical
“
3
”
Remove any items sitting on the cart top.
Remove cart top by lifting near the chemical
bottles. See Fig. B.
Remove tubing from checkvalve/metering tip
holder.
Push the selected metering tip into metering
tip holder. Put clean metering tips into any
unused lines. See Fig. C.
Replace tubing.
Connect the red wire to the red
terminal on
the battery.
Replace top.
1.
2.
3.
4.
5.
6.
7.
Pegs
Metering Tip Selection:
The fi nal concentration of the dispensed solution is related to both the size of the metering tip opening, and
the viscosity of the liquid being siphoned. For water-thin products, the chart can be used as a guideline.
Because dilution can vary with water temperature and pressure, and if the product is noticeably thicker than
water, dilution rates shown should be viewed as approximate.
Orifi ce
Size
Tip
Color
Average
Dilution Ratio
no tip
4:1
0.128
grey
4.25:1
0.098
black
4.5:1
0.070
beige
4.5:1
0.052
red
5:1
0.043
white
6:1
0.040
blue
7:1
0.035
tan
8:1
0.028
green
10:1
0.025
orange
12:1
0.023
brown
16:1
0.020
yellow
20:1
0.018
aqua
24:1
0.014
purple
32:1
0.010
pink
64:1
Fig. B
Fig. C
4
Chemical “1
”
Check valve/
metering tip
holder
Metering
Tip
Chemical “2
”
Note:
Feed lines are marked corresponding to numbers on control panel.
