Hydro EvoClean 1214GB, User Manual

Page: 3 / 28

Page 3 Hydro Systems Co. 2018
introduction
1. safety
Overview
The EvoClean is a low maintenance, venturi-based, water
powered laundry unit. It features an integrated control system
that can be used for applications requiring four, six or eight
products and also offers an integrated flush manifold, ‘out-of-
product’ alarm and optional remote formula select.
Note: The EvoClean may be referred to as the ‘Dispenser’ or
‘unit’ throughout this manual.
Please look at and read these instructions carefully before
starting installation, operation, maintenance and keep for
future reference.
Remove all packaging and check the EvoClean includes all
parts against the Contents of Packaging or damage before
starting installation.
Any alterations made to the EvoClean and fittings will invalidate
the Warranty.
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS
Please use this equipment carefully and observe all warnings and cautions.
WARNING Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.
WEAR Protective clothing and eye wear when dispensing chemicals or other materials or when working in
the vicinity of all chemicals, filling or emptying equipment, or changing metering tips.
ALWAYS Observe safety and handling instructions of the chemical manufacturer.
Direct discharge away from you or other persons or into approved containers.
Dispense cleaners and chemicals in accordance with manufacturer’s instructions.
Exercise CAUTION when maintaining your equipment.
Reassemble equipment according to instruction procedures.
Be sure all components are firmly screwed or latched into position.
KEEP
Equipment clean to maintain proper operation.
• This unit is not to be used with ATEX chemicals.
• This unit is not to be used with chemicals outside the temperature of 0-60°C.
Do not mix cleaning chemical products.
Electrical
• All mains electrical work must be carried out in accordance
with local and national regulations, and by a qualified
electrician.
• The unit MUST be disconnected from its power source
during cleaning, servicing or when replacing parts.
• The Alarm should only be operated at or within the voltage
specified in this Installation and Manual.
• The installer and user are responsible for ensuring the
installation and operation of this Alarm are in accordance
with this Installation and User Manual and local and
national regulations.