41
Page
ADDITIONAL FEATURES
You can get some informa
tion
about the micro-boiler c
ondition
by pressing the
"INFO"
bu
tt
on. For more
informa
tion,
follow the procedures below:
The remote controller has a
function
that can change units of temperature and
fl
ow rate from °F to °C and
from gallon per minute to liter per minute and vice ver
sa,
please follow the procedures below:
Owner's Guide
-Unit conversion mode-
Opera
tion
Scr
een
on
the c
on
tr
oller
Temperature c
on
tr
oller
R
emo
te c
on
tr
oller
1.
Press the
"ON/OFF"
bu
tt
on on the controller in
order to turn the controller on.
2.
When
ON,
the orange LED is lit.
3.
The previous set temperature will be displayed on
the screen.
4.
Press the
"INFO"
bu
tt
ons for at least 3 seconds.
5.
The set temperature should now be displayed in the
alternate unit of measurement.
(EX.: 100 °F)
(EX.: 38 °C)
Opera
tion
Scr
een
on
the c
on
tr
oller
Temperature c
on
tr
oller
R
emo
te c
on
tr
oller
1.
First of
all,
inlet water temperature will be displayed
on the controller by pressing the
"INFO"
bu
tt
on.
2.
Outlet water temperature will be displayed on the
controller by pressing the
"INFO"
bu
tt
on.
3.
And then
,
water
flow
will be displayed on the
controller by pressing the
"INFO"
bu
tt
on.
4.
Press the
"INFO"
bu
tt
on to
finish
informa
tion
mode.
Inlet water temperature
(EX.: 60 °F)
Outlet water temperature
(EX.: 120 °F)
Water
fl
ow
(EX.: 3.5 GPM)
When the micro-boiler is connected with the remote controller, the temperature
controller will not operate temperature settings, as only work for the information
mode.
