ORBIT
®
SPRINKLER SySTEm DESIGNER™
InstallatIon GuIde
Step 1: Use poly insert fitting and correct number of clamps for each connection.
Step 3: Slip pipe clamp over joint and tighten firmly.
Step 4: Slip remaining clamps on fitting barbed ends.
Step 5: Firmly insert barbed end of poly insert
barb into additional poly pipe until fully seated.
Step 6: Slip pipe clamp over joint and tighten
firmly.
Step 7: Repeat steps 5 and 6 as many times as
needed to add desired additional poly pipe.
aPPendIx
JOINING 3/4" AND 1" BLU-LOCK PIPE AND FITTINGS TO POLY PIPE
3/4" and 1" Blu-Lock pipe have the same internal dimensions (ID) as 3/4" and 1" poly pipe. However, you
should never use Blu-Lock fittings with another manufacturers poly pipe. In the event that your store does
not carry 3/4" or 1" Blu-Lock Pipe, you may use standard poly insert barbs and clamps, which are available
at your local store, to join 3/4" and 1" Blu-Lock Pipe to poly pipe. To add additional poly pipe to Blu-Lock:
Step 2: Firmly insert barbed end of poly insert barb into Blu-Lock pipe until fully seated.
3/4" or 1" Poly Pipe
3/4" or 1" Blu-Lock Pipe
Poly Insert
Coupling
