HRC 390 SERIES
Quick Start inStructionS
Step 1 Power Up:
remove the contact
strip from the battery compartment to activate
battery power. if back light is needed plug the
timer into a 110 v outlet and the screen will
light up.
Step 2 Programming Tool:
obtain the
stylus by removing it from its holster located
on the back of the controller module.
Step 3 Press Reset:
use stylus to press
the reset button. all functions will appear then
quickly disappear to indicate the timer has
been activated and made ready for program-
ming.
Step 4 Set Language:
using the stylus to
navigate the
/
select your preferred pro-
gramming language English, Espanol, Fran-
cais, Deutsch, italiano then press “
EntEr
”.
Step 5 Set Time and Date:
using the
stylus to navigate the
/
select current time
then press “
EntEr
”. Follow similar process as
the controller directs you to “
SEt YEar
” then
“
EntEr
” , “
SEt MontH
”, “
SEt DaY
”.
Step 6 Set Program Start Times:
using
the stylus toggle to the desired program a, B,
or c by touching the on screen . using the sty-
lus to navigate the
/
select preferred start
time for each program then press “
EntEr
”.
Step 7 Set Water Days:
using the stylus
toggle to the desired program a, B, or c by
touching the on screen . Select specific days
of the week or
oDD
or
EVEn
days then “
En-
tEr
”. Should you select
intErVaL
use the
/
to select 1 to 32 days then “
EntEr
”.
Step 8 Set Station Duration:
using the
stylus toggle to the desired program a, B, or c
by touching the on screen . using the stylus
to navigate the / select preferred 1 to 240
that station “
1
” will water then press “
EntEr
”.
or, select minutes by selecting the box marked
0, 5, 10, etc… then press “
EntEr
”. Follow the
same progression for all remaining needed
stations.
PROGRAMMING IS NOW COMPLETED
PRESS “
ENTER
”:
if you have removed the
module from the power box replace it and
make sure the unit is plugged into a 110 v out-
let or hard wired to 110v power. this control-
ler will not operate valves running on battery
power.
A
A
A
p 801 295 9820
f 801 951 5815
www.fluid-studio.net
1065 South 500 West
Bountiful, Utah 84010
proof no:
1
date:
10.26.11
des:
MZ
client:
Hydro-Rain
sku:
04040
upc:
N/A
file name:
04040-50 rA.indd
software:
InDesign CS5
colors
additional instructions:
color
non printing
PMS
2955
PMS
????
color
non printing
PMS
????
Registration
K
Printers are
responsible for
meeting print
production
requirements.
Any changes
must be approved
by the client and
Fluid Studio.
Printed piece
must meet
designated
specifications
on this form.
dimensions:
flat: w: 6.5" h: 5.5"
finished: w: 6.5" h: 5.5"
04040-50 ra
