Section 3:
PROGRAMMING YOUR CONTROLLER
Walk through programming is available after pressing the
RESET
button. (If you began the programming sequence
with Section 1 do not press “reset” again.)
Program Toggle Feature
The Program Toggle Feature allows you to switch back
and forth between Program A, Program B and Program
C. Press
PROG. A B C
on the touch screen to select
Program A (“A” is larger than “B”) or Press
PROG. A B
C
on the touch screen to select Program B (“B” is larger
than “A” etc.). You can change the watering start times,
watering days, and watering durations for each program.
Set Start Times
• Press or to set the start time for the selected
program. Press
ENTER
.
Set Water Days
• Press
ODD
,
EVEN
,
INTERVAL
(1-32 days using or )
or the specific days of the week (
Su
,
Mo
,
Tu
,
We
,
Th
,
Fr
,
Sa
) you want the selected program to water. Press
ENTER
.
Set Station Watering Durations
• Select the first station to be watered by pressing the
station number (1 should be flashing) on the bottom
of the touch screen or press
ENTER
to advance to the
desired station.
Note: The active station, being
programed, is flashing.
• Set the watering duration for each station by either:
1. Selecting one of the preset watering duration minutes
(
0
,
5
,
10
,
15
,
20
,
30
or
45
) on the bottom of the LCD.
2. Using the or to enter the desired minutes.
Note: a watering duration must be entered for each water-
ing station or the station will not water.
• Follow the same procedure to set the watering durations
for all other stations.
• Press
EXIT
.
At this point you will see the
PROGRAMMING COMPLETE
screen. If you wish to go back and change any of the set-
SET START TIME
12:00
AM
ENTER
BACK
PROG.
A
Figure 2:
Set Start Times
PROG.
A
PROG.
B
PROG.
C
Figure 2:
Program Toggle Feature
Figure 3:
Set Watering Days
SET
ENTER
BACK
PROG.
A
ODD
Su Mo Tu We
Th
Fr
Sa
EVEN
INTERVAL
WATERING DAYS
n
05
n
