6
4. Pull and separate the Inner Shell from the Outer Shell.
5. Lift up and remove the current Hard Boot or Brush Ring from the bottom lip of the Outer
Shell.
6.
Place the desired Brush Ring back onto the
bottom lip
of the Outer Shell.
7.
Place the Inner Shell back onto the Outer Shell with
the
rectangular retaining nuts going through the
openings in
the Inner Shell. The flanges on the Inner
Shell set on the
edge of the
Brush Ring to hold it in place.
8.
Turn the rectangular retaining nuts perpendicular to the
slots in the bottom of the Inner Shell.
Retaining nuts
may need to be tightened so that they each contact the plastic surface of
the inner shell when the retaining levers are pushed back down to assure
that the SX-15 assembly is secured properly.
Three Rectangular Retaining Nuts
Retaining Nut Aligned for
Inner Shell Removal
Remove the Brush Ring or Hard Boot
Separate the Outer & Inner Shells
Place the Brush Ring on the Outer Shell
