4
Connecting Handle to SX-15 Head
Connecting the Gekko Handle
AR51A to the SX-15 Head is a
simple procedure:
Thread Gekko Handle coupler
onto male threads of SX-15
Adapter NM5640.
Connect the SX-15 solution hose
to the Gekko Handle Solution
Hose by snapping the 1/4” male
quick connect and the 1/4”
female quick connect together.
The SX-15 can easily be removed
and the Gekko Handle can then be
used with any of our other Gekko
Tools. (See Gekko Tools on Page 9).
Vacuum Relief Vent Adjustment
The SX-15 has vacuum relief vents on top of the head assembly. To increase the water recovery,
move the vacuum relief slide to the left to close the three vents. To prevent the SX-15 from
sticking to the floor and to make the SX-15 easier to move, push the vacuum relief slide to the
right to open the vents. Try different slide position settings to get the best movement and recovery
for your equipment and the type of floor being cleaned.
Vacuum Relief Slide – Moved Left
Vacuum Relief Vents - CLOSED
Vacuum Relief Slide – Moved Right
Vacuum Relief Vents - OPEN
Vacuum
Relief Vents
Gekko Handle Coupler
NM5855
SX-15 Adapter
NM5640
Gekko Handle Solution Hose – NM5856
SX-15 Solution Hose – NM5857
