OSPREY HYDRAULICS
™
5
DIRECTIONS & FEATURES
HOW TO FILL
INSIDE YOUR PACK
SLIDE-SEAL
™
Grab the slider with one hand and the carry handle with the other and pull in opposite
directions. The slider can be reversed by unthreading the tether from the carry
handle and girth-hitching it onto the opposite side.
1. To fill your reservoir, remove the Slide-Seal
™
and unfold the PourShield
™
.
All Osprey Hydraulics
™
reservoirs by Hydrapak
™
have a hook in the middle of
the slider to hang from webbing loops commonly found in backpack reservoir
sleeves to keep them upright inside your pack.
The backerplate on our 2L and 3L reservoirs makes inserting a full reservoir
into your pack easy by providing structure. The secure grip on the carry handle
assists in removal of reservoirs. It is easier to pack a full reservoir into an
unloaded pack but is still achievable when your pack is stuffed.
2. Pinch the PourShield
™
with one hand to create a wide opening, and hold the
carry handle with the other hand for stability while filling.
3. Replace the Slide-Seal
™
and tip the reservoir upside down to check for
leaks, then suck excess air out to prevent unnecessary sloshing.
