3-1 - Tool Maintenance
3 - Tool Maintenance
Removing and Reinstalling the Clear
Window Cover
1.
Remove vacuum hose cuff from tool and
disconnect the solution hose quick connect as
shown in Figure 3-1.
Note:
Lightly heating the “cuff” with a hair
dryer will make it easier to remove and install.
2.
Remove the knob by removing the 8/32” Allen
head screw as shown in Figure 3-2.
Figure 3-2. Remove Solution
Control Knob
3.
Remove all screws from both sides of the tool (Figure 3-3) and carefully separate
the tool halves (Figure 3-4).
Figure 3-1. Remove Tool
from Hose
Figure 3-3. Remove All Screws on
Tool
Figure 3-4. Separate Tool in Half
