2-3 - Tool Operation
Note:
The amount of vacuum and pressure produced by your machine will determine
the amount of overspray from the Solution Bar Jet. The patented Solution Bar Jet
makes a trigger valve unnecessary.
When the
Solution Control Knob
is turned toward the “HiFlo” position, the water will form
a sheet across the
Solution Bar
Jet
.
Be careful not to touch the Solution Bar Jet; it may cause severe burns!
It may be necessary to periodically clean the inside of the tool, hose and manifold. Debris
can build up over time, restricting the vacuum flow (see Figure 3-6).
