manualshive.com logo in svg

HydraMaster Diamond Products GTXR+, Owner'S Manual And Maintenance Logs

Share
Download
HydraMaster Diamond Products GTXR+ Owner'S Manual And Maintenance Logs Download Page 24

  Diamond Products GTXR+ - Owner’s Guide:  22

OPERATIONAL MAINTENANCE

Daily Maintenance

•  Check the engine oil level. Add oil if needed.

•  Check the high pressure pump oil. Add oil if needed.

• 

Inspect and clean the recovery tank filters and sacrificial anodes.

• 

Inspect and clean the orifices and filters.

•  Inspect and clean the garden hose screen.

•  Inspect the truckmount for water and oil leaks, loose electrical connections, etc. and 

repair as needed.

•  Lubricate the blower lube port with HydraMaster-recommended spray lubricant. 

Weekly Maintenance

• 

Inspect the recovery tank filters for tears, holes, etc. Repair or replace as needed.

• 

Inspect the sacrificial anode assembly in the tank and repair or replace as needed.

•  Inspect the vacuum relief valve. Clean and lubricate as necessary.

•  Clean the recovery tank thoroughly with pressure washer.

•  Check the oil level in the blower. Add oil if needed.

•  Check the pump drive belt for wear and proper tension. Tighten as needed.

• 

Check all the hoses and wiring for wear and chafing. Secure as needed.

•  Flush the water and chemical systems with solution of equal parts white vinegar and 

water.

•  Check all the nuts and bolts. Tighten as needed.

•  One time change of the high pressure pump oil after 50 hours of operation. (Every 500 

hours thereafter.)

•  One time change of the engine oil after 8 hours of operation.

•  Change the engine oil every 50 hours. (Every 25 hours if operating in high ambient 

temperatures or heavy use conditions.) Change oil filter every oil change. 

Monthly Maintenance

• 

Check the engine air filter. Clean or replace as necessary.

•  Check the water level in battery. Fill as needed.

•  Clean the battery terminals as needed.

• 

Change the blower oil after first 100 hours of use.

Quarterly Maintenance

•  Check the fuel lines. Repair or replace as needed.

•  Clean and gap the spark plugs to 0.030”. Replace if excessive carbon buildup is visible.

• 

Change the fuel filter.

•  Change pump drive belt.

100 Hours

•  Replace spark plugs

Summary of Contents for Diamond Products GTXR+


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands