Mounting the filter housing
MRFD1
en(us)
Page 24 / 44
MoWa MRFD1 4113517a en-us 2016-08-10.docx
2016-08-10
Mounting the filter housing
The filter housing is designed for horizontal or vertical installation in a pipeline
or hose line with flange connection, SAE1" (3000 PSI).
Use both rear side fastening threads M12, 15 mm deep.
Before installation, coat the connector threads with a lubricant
containing a slip additive (MoS2). This prevents damage to the
connector threads during installation.
Make sure that there is sufficient space below the filter housing to replace the
filter element.
